-
When a Hand Pallet Truck Is the Right Tool for the Job
Hand pallet trucks handle the work that doesn't justify a forklift. Short moves. Staging and positioning. Loading and unloading delivery trucks. Backup coverage when a powered unit is down for service.
They're the right call in retail stockrooms, tight aisles, dock areas, and any operation where a powered unit is more equipment than the job requires. No batteries to charge, no chargers to install, no waiting on a unit to come back up.
For most operations, a manual jack isn't a compromise — it's the correct tool for a specific set of tasks that happen every day.
Call 800-926-2546 with your application and we'll tell you whether a manual unit covers it.
How a Hydraulic Pallet Jack Works — and What Makes One Last
A hydraulic pallet jack lifts through a hand-pumped cylinder. The operator slides the forks into the pallet, pumps the handle to raise the load a few inches off the floor, and moves it into position. The mechanism is simple. What separates a jack that runs for a decade from one that fails in eighteen months is the engineering built around it.
-
Productivity
Fork tip entry rollers ease the transition over the bottom pallet boards, so operators aren't fighting the pallet on every entry. -
Durability
Adjustable tubular push rods and self-lubricating bushings minimize wear at the points that fail first on lower-grade equipment. -
Ergonomics
A teardrop handle with a 3-way position lever gives operators precise load control without excess effort.
Raymond's cast one-piece hydraulic pumps are built to reduce service requirements over the life of the unit — a design decision that matters more the harder you run the equipment.
Find The Right Manual Pallet Jack For Your Operation
We carry twelve Raymond hand pallet truck models spanning 3,000 to 8,000 lbs capacity, with fork lengths from 36 to 96 inches and frame widths from 16 to 33 inches. That range covers standard warehouse work through specialty applications most suppliers can't accommodate. If you're looking for a manual pallet jack for sale in a standard configuration, the 5,000 and hand pallet truck 5500 lb models handle the majority of everyday pallet movement. Call 800-926-2546 with your load weight and pallet dimensions — we'll narrow it to a model in one conversation.
Find The Right Hand Pallet Truck For You
Pallet Truck With Scale
- Capacity: 5,000 lbs.
- Frame Width: 27"
- Fork Length: 48"
Learn More
RJ50N Hand Pallet Jack
- Capacity: 5,500 lbs.
- Fork Length: 36", 42", or 48"
- Frame Width: 16", 20.5", or 27"
Learn More
RJ50P Hand Pallet Jack
- Capacity: 5,000 lbs.
- Fork Length: 48"
- Frame Width: 20.5" or 27"
Learn More
LCF44 Freezer Special Hand Pallet Truck
- Capacity: 4,400 lbs.
- Fork Length: 48"
- Frame Width: 27"
Learn More
LCM4W and LCU4W 4-Way Hand Pallet Truck
- Capacity: 5,000 lbs.
- Frame Width: 33"
Learn More
LCM50 and LCU50 Low Profile Pallet Jacks
- Capacity: 5,000 lbs.
- Fork Length: 42" or 48"
- Frame Width: 20.5", 27", or 29"
Learn More
LCS80 Heavy-Duty Pallet Jack
- Capacity: 8,000 lbs.
- Fork Length: 48"
- Frame Width: 27"
Learn More
Altra Lift Hand Pallet Jack
- Capacity: 5,500 lbs.
- Fork Length: 36", 42", 48", or 72"
- Frame Width: 20.5" or 27"
Learn More
PST23 Power Start-Assist Hand Pallet Jack
- Capacity: 5,000 lbs.
- Fork Length: 36", 42", or 48"
- Frame Width: 20.5" or 27"
Learn More
RG30E Electric Skid Lifter Pallet Truck
- Capacity: 3,000 lbs.
- Fork Length: 48"
- Frame Width: 20.5" or 27"
- Battery: 12 volt DC (RG30E only)
Learn More
SS45 Stainless Steel Hand Pallet Jack
- Capacity: 4,400 lbs.
- Fork Length: 48"
- Frame Width: 27"
Learn More
LCS55 Unique Size Hand Pallet Trucks
- Capacity: 5,500 lbs.
- Fork Length: 36" to 96"
- Frame Width: 18", 20.5", or 27"
Learn More
Interested in a Raymond Hand Pallet Truck? Let's Talk!
A representative will use the information you provide below to develop the best solutions for your operation.
-
Electric Pallet Jacks for Sale Electric pallet jacks are designed for higher-volume warehouse and material handling applications where powered travel can improve productivity and reduce operator effort. Malin offers walkie and rider pallet trucks built for horizontal transport, order picking, dock work, and movement between warehouse work areas. Available in multiple capacities and configurations, these powered pallet trucks help operations match equipment to travel distance, load requirements, and workflow demands.
Find The Right Electric Pallet Jack For You
8210 Walkie Pallet Jack
- Capacity: 4,500 lbs.
- Frame Width: 28" overall width
- Battery: 24 volt
Learn More
8250 Lithium-ion Pallet Jack
- Capacity: 5,000 lbs.
- Frame Width: 28" overall width
- Battery: 24 volt (26 nominal) Lithium-ion, 78 amp hour
Learn More
8310 Walkie Pallet Jack
- Capacity: 6,000 lbs. or 8,000 lbs.
- Frame Length: Available in multiple lengths and widths
- Battery: 24 volt
Learn More
8410 End Rider Pallet Jack
- Capacity: 6,000 lbs. or 8,000 lbs.
- Frame Length: Available in multiple lengths and widths
- Battery: 24 volt
Learn More
8510 Center Rider Pallet Truck
- Capacity: 6,000 lbs. or 8,000 lbs.
- Frame Length: Available in multiple lengths and widths
- Battery: 24 volt
Learn More
8720 Second Level Orderpicker
- Capacity: 6,000 lbs. or 8,000 lbs.
- Frame Length: Single, Double and Triple Configurations
- Battery: 24 volt
Learn More
8810 Side Entry Pallet Truck
- Capacity: 6,000 lbs. or 8,000 lbs.
- Battery: 24 volt
Learn More
8910 End Rider Pallet Jack
- Capacity: 6,000 lbs. or 8,000 lbs.
- Frame Length: Available in multiple lengths and widths
- Battery: 24 volt
Learn More
Electric Pallet Jack Solutions for Every Operation
-
Lithium-Ion & Advanced Power Options
Lithium-ion electric pallet jacks offer faster charging, longer run times, and reduced maintenance compared to traditional battery systems. These solutions are ideal for multi-shift operations looking to maximize uptime and minimize interruptions. -
High-Performance Applications
For operations that demand consistent performance and higher load capacities, heavy-duty electric pallet jacks deliver the power and durability needed to keep workflows moving. These models are built for continuous use in demanding warehouse and distribution environments.
Learn more about electric and manual pallet jacks, lift capacities, rider models, lithium-ion power, and warehouse picking technology.
A manual pallet jack relies on the operator for both lifting and horizontal movement. Manual pallet jacks are best suited for light-duty, short-distance tasks. An electric pallet jack uses a battery-powered motor for both functions, reducing operator fatigue and improving throughput in horizontal transport and order-picking applications.
Malin offers the full Raymond 8000 Series, including the 8210 and 8310 walkie pallet trucks, the 8250 lithium-ion model, the 8410 and 8910 end rider models, the 8510 center rider, the 8810 side-entry pallet truck, and the 8720 second-level order picker.
Capacities range from 4,500 pounds on the 8210 walkie model to 8,000 pounds on heavier-duty walkie and rider models. The 8250 lithium-ion model is rated at 5,000 pounds. Multiple frame lengths and widths are available to accommodate different pallet sizes and aisle configurations.
A walkie pallet jack is operated by a pedestrian walking alongside the truck. These models are well suited for shorter runs and tighter spaces.
A rider model has a platform for the operator to stand on, making it a better choice for longer transport distances and high-volume order fulfillment where travel time is a key efficiency factor.
Lithium-ion powered pallet trucks support opportunity charging without battery damage, deliver consistent power throughout the shift without voltage drop, and require no watering. The Raymond 8250 is built specifically around these benefits. These pallet jacks are a strong option for demanding, multi-shift operations.
Rider models such as the 8410 end rider and 8510 center rider reduce operator fatigue on long travel routes and increase picks per hour. The 8720 second-level order picker adds access to second- and third-load-beam levels. Pairing these models with the Pick2Pallet LED system can further improve accuracy in batch-picking applications.
Yes. Raymond electric pallet jacks are compatible with the Pick2Pallet LED Light System, a put-to-light solution embedded directly into the forks. LED lights guide operators to the correct pallet during batch picking, reducing errors and increasing picking speeds without disrupting workflow.
Frequently Asked Questions About Pallet Jacks
What is the difference between an electric pallet jack and a manual pallet jack?
What types of powered pallet trucks does Malin offer?
What lift capacities are available for electric pallet jacks?
What is the difference between a walkie pallet jack and a rider pallet jack?
Are lithium-ion pallet jacks better than traditional battery-powered models?
Which pallet jack is best for high-volume warehouse order picking?
Do electric pallet jacks include advanced picking technologies like pick-to-light systems?
